 2008/09 Honda CBR 1000 RR Fender Eliminator
Why ruin a beautiful bike like the CBR with a monster fender? Get a race inspired super slim fender eliminator kit from TaylorMade Racing. Our undertail kit is 100% carbon fibre and fits perfectly in the space left by removing the stock undertail. This is like no other kit on the market, it really fits!
To achieve the super slim profile we have replaced the stock tail light with one super bright Dual Intensity LED: which acts as both the running light and brake light so you still maintain high visibility despite the slim profile.
Also included is a single, very stealthy, wide angle LED for license plate illumination – can you spot it?
Fitting requires no modifications to your bike and comes complete with all the necessary connectors. And as we have said before, the fit is PERFECT!
The complete kit includes; eliminator, dual LED, license plate bracket, license plate LED, turn signal bracket and our amber shortie turn signals. People running a different plate or turn signal set up can purchase the just the eliminator without the additional brackets.
TMR H8FC, Complete kit
TMR H8FL, Eliminator and plate holder only
TMR H8FE, Eliminator only |
$220.00
$185.00
$150.00 |
 |
|
|
|
 2008/2009 Honda CBR 1000 RR Carbon/Kevlar Engine Cover Crash Guards
Race legal!
This is the exact same cover you’ve seen on Honda’s Superbikes this year. Unlike other covers, this is not a decorative piece. TaylorMade’s cover is sandwich of carbon fibre with an inner filling made up of abrasion resistant layers of pure Kevlar.
Unlike thick billet covers which can be made so strong they actually deform the crankcases on impact TMR composite covers are designed to be sacrificial. Composite covers are deemed so superior to billet covers they are actually mandated by World Superbike rules.
Our covers have been thoroughly tested in the heat of competition and are proven to protect your valuable crank cases - as you can see from the extreme example to your right.
Covers are designed to fit over the stock pieces using stock bolts and so do not require removing the stock cover to mount them. These sacrificial covers are quick and easy to fit, yet provide protection to expensive crankcases. TaylorMade covers are ideal for track day riders.
TMR H8LC, Carbon/Kevlar Left Side cover
TMR H8RC, Carbon/Kevlar Right Side cover |
$140.00
$140.00
|
|
|
|
|
| 2008/2009 Honda CBR 1000 RR Carbon Shark Guard
AMA Homologated Race part.
Shark Guards prevent fingers and toes getting trapped between the drive chain and rear sprocket and are a mandated safety feature by many racing sanctioning bodies. TaylorMade shark guards are 100% carbon fibre and will require you to fit 2 threaded inserts to the underside of your swing arm.
|
TMR SG2, Carbon Shark Guard
|
$62.00
|
|
|
|
|
| 2008/2009 Honda CBR 1000 RR Carbon Rear Fender
Look at any top level Superbike or GP bike and you will always see a full enclosure rear fender. The main benefit is reducing aero dynamic drag plus keeping unobtainium shocks safe from flying debris. Our superbike fender for the Fireblade is designed first and foremost to reduce drag but John Keogh couldn’t resist making it look really cool too. Constructed from carbon fibre this fender is the highest quality available. Sized to fit wide 200 section rear doughnuts our fender is a genuine Factory racing part.
Please Note: This is a racing part, and designed to be as light as possible. The surface is uncoated and will not be completely smooth or glossy. This is the natural surface of the carbon fiber. Customers desiring a show finish will want to have the part clearcoated
.Our Honda CBR Rear Fender is no longer made out of Pre-Preg Carbon. It is still 100% Carbon but produced as a Wet-Layup which is less labor.
TMR H8RF, Carbon Rear Fender |
$245.00
|
|
|
|
|
| 2008/2009 Honda CBR 1000 RR Racing Air Tunnels
Racing air tunnels optimize air flow to the air box to maximize ram effect and horsepower. Our tunnels are fabricated from super thin fiberglass to comply with US racing regulations. The inner surface of the tunnels is lined with a smooth surfacer to enhance air flow. Each tunnel weighs only 5 ounces (140 gms).
Tunnels are designed to fit with the OEM fairing intake shape and will even fit the stock fairing.
|
TMR H8AT, Racing Air Tunnels
|
$400.00/pair
|
|
|
|
|
| 2008/2009 Honda CBR 1000 Counter Shaft Sprocket Cover
Track day riders and racers can swap from road to race pattern gear change in just a couple of minutes with our sprocket cover. Made in all carbon fibre and using stock mounting points the cover is easy to fit, super practical and super cool to look at.
|
TMR H8SC, Counter Shaft Sprocket Cover
|
$133.00
|
|
|
|
|
|
2008/2009 Honda CBR 600 RR Carbon/Kevlar Engine Cover Crash Guards
AMA Homologated Race parts and as supplied to AMA championship winning Honda teams
TaylorMade’s engine case covers are not mere decorative pieces. Our covers are a sandwich of carbon fibre with an inner filling made up of abrasion resistant layers of pure Kevlar. Unlike thick billet covers which can be made so strong they actually deform the crankcases on impact TMR composite covers are designed to be sacrificial. Composite covers are deemed so superior to billet covers they are actually mandated by World Superbike rules.
Covers are designed to fit over the stock pieces using stock bolts and so do not require removing the stock cover to mount them. These sacrificial covers are quick and easy to fit, yet provide protection to expensive crankcases. TaylorMade covers are ideal for track day riders.
TMR H9LC, Carbon/Kevlar Left Side cover
TMR H9RC, Carbon/Kevlar Right Side cover |
$140.00
$140.00
|
|
|
|
|
|
2008/2009 Honda CBR 600 RR Carbon Shark Guard
AMA Homologated Race part and as supplied to AMA championship winning Honda teams
Shark Guards prevent fingers and toes getting trapped between the drive chain and rear sprocket and are a mandated safety feature by many racing sanctioning bodies. TaylorMade shark guards are 100% carbon fibre and will require you to fit 2 threaded inserts to the underside of your swing arm.
| TMR SG3, Carbon Shark Guard |
$76.00
|
|
|
|
|
|
2008/09 Suzuki GSXR 600/750 Fender Eliminator/Plate Holder
A simple and stylish addition to your Suzuki.
Our fender eliminator is solid carbon fiber, and fits exactly in the space left by removing the stock bracket. Eliminator kits come with a super stealthy LED to light the plate, and all spacers and mounting hardware needed.
|
TMR S8FE, Fender Eliminator
|
$95.00
|
|
|
|
|
 2007/08 Suzuki GSXR 1000 Fender Eliminator/Plate Holder
A simple and stylish addition to your Suzuki.
Our fender eliminator is solid carbon fiber, and fits exactly in the space left by removing the stock bracket. Eliminator kits come with a super bright LED bulb to light the plate, and all spacers and mounting hardware needed.
| TMR017FE, Fender Eliminator |
$95.00
|
|
|
|
| |
|
| 2009 Suzuki GSXR 1000 Fender Eliminator
The perfect addition to our motoGP exhaust for the big Suzuki.
Our fender eliminator is solid carbon fiber, and fits exactly in the space left by removing the stock bracket.
Eliminator kits come with a super bright LED bulb to light the plate, and all spacers and mounting hardware
needed. Features matching styling to perfectly tidy up the rear undertray.
| TMRS9FE, Carbon Fender Eliminator |
$95.00
|
|
|
|
|
| 2009 Suzuki GSXR 1000 Rear Hugger
Our most gorgeous piece of carbon-fibre yet; this rear hugger blends perfectly not only with the new
big Suzuki's organic lines but also with the other Taylormade accessories for the GSXR.
Constructed from pre-preg carbon fibre and vacuum cured at high temperature this fender is the highest
quality available. Please Note: This is a racing part, and designed to be as light as possible. The surface
is uncoated and will not be completely smooth or glossy. This is the natural surface of the prepreg carbon fiber.
Customers desiring a show finish will want to have the part clearcoated.
| TMRS9RF, Hugger |
$189.00
|
|
|
|
|
| 2009 Suzuki GSXR 1000 Chain Guard
Designed to match our lower 'Shark' guard and provide a far better looking piece than the clumsy stock
item, our 'organic' chain guard provides imporved protection in a sinewy form that also matches the
other Taylormade GSXR accessories.
Constructed from pre-preg carbon fibre and vacuum-cured at high temperature this guard is the highest
quality available and uses the stock fittings.
| TMRS9CG, Chain Guard |
$134.00
|
|
|
|
|
| 2009 Suzuki GSXR 1000 Shark Guard
A Suzuki kindly provide race stand bobbins on the 2009 GSXR - the perfect place to mount our
race-approved 'shark' fin chain guard. Mandatory on racebikes since the likes of Daryl Beattie and Alberto Puig lost toes from trapping a foot between chain and sprocket this little fella not only looks the business but protects as well.
Designed to match our 2009 Suzuki chain guard and rear hugger.
| TMRS9SG, Shark Guard |
$65.00
|
|
|
|
|
| 2009 Suzuki GSXR 1000 Left-side Engine Trim
Taylormade have made this superior replacement carbon-fibre trim piece for the left-side
engine fairing on the '09 GSXR.
This replaces the stock blocky black plastic cover to supplement our other carbon pieces
for the bike.
| TMR S9BP, Engine Trim |
$125.00
|
|
|
|
|
| 2009 Suzuki GSXR 1000 Heel Plates
Get rid of those unsightly pressed-tin heel plates with our ergonomically designed carbon-fibre items.
Our lightweight plates fit exactly on the stock adjustable peg-mounts using the stock fixings,
and are designed to match the bodywork lines (unlike the orginals!) to give the perfect finishing detail
touch as well as offering boot protection from the chain and brake master cylinder.
TMR S9HS, Heel Guards Pair
TMR S9HL, Heel Guard (left)
TMR S9HR, Heel Guards (left) |
$129.00
$69.00
$69.00
|
|
|
|
|
|
2007 - 2009 Yamaha R6 Carbon/Kevlar Engine Cover Crash Guards
AMA Homologated Race parts.
TaylorMade’s engine case covers are not mere decorative pieces. Our covers are a sandwich of carbon fibre with an inner filling made up of abrasion resistant layers of pure Kevlar. Unlike thick billet covers which can be made so strong they actually deform the crankcases on impact TMR composite covers are designed to be sacrificial. Composite covers are deemed so superior to billet covers they are actually mandated by World Superbike rules.
Covers are designed to fit over the stock pieces using stock bolts and so do not require removing the stock cover to mount them. These sacrificial covers are quick and easy to fit, yet provide protection to expensive crankcases. TaylorMade covers are ideal for track day riders.
TMR Y6LC, Carbon/Kevlar Left Side cover
TMR Y6RC, Carbon/Kevlar Right Side cover
|
$140.00
$140.00
|
|
|
|
|
|
2007 - 2009 Yamaha R6 Carbon Shark Guard
AMA Homologated Race part and as supplied to AMA championship winning Yamaha teams.
Shark Guards prevent fingers and toes getting trapped between the drive chain and rear sprocket and are a mandated safety feature by many racing sanctioning bodies. TaylorMade shark guards are 100% carbon fibre and will require you to fit 2 threaded inserts to the underside of your swing arm.
| TMR SG1, Carbon Shark Guard |
$62.00
|
|
|
|
|
|
Kawasaki ZX-10 Fender Eliminator Kit
TaylorMade Racing announces the release of the smallest, cleanest Fender Eliminator available for the 2011 Kawasaki ZX-10R.
We’ve diminished the massive stock tail to a streamlined shape that compliments the aggressive lines of the stock fairings. Made with five layers of high quality carbon fiber, our eliminator is strong yet stylish. Our eliminator retains the original passenger seat release lock and despite its size we’ve managed to increase the storage capacity.
Available in three levels of specification for you to customize and get exactly the look you want.
|
K11FE, Fender Eliminator Only + Long LED |
$180.00
|
|
K11FL, Fender Eliminator + Long LED + License Plated LED + License Plate Bracket |
$215.00
|
|
K11FC, Fender Eliminator + Long LED + License Plate LED + License Plate Bracket + Turn Signals + Turn Signal Bracket |
$235.00
|
|
|
|
|
|
Buell 1125R AMA Approved Engine Covers
TaylorMade Racing’s engine case covers are not mere decorative pieces. Our covers are a sandwich of carbon fibre with an inner filling made up of abrasion resistant layers of pure Kevlar. Unlike thick billet covers which can be made so strong they actually deform the crankcases on impact TMR composite covers are designed to be sacrificial. Composite covers are deemed so superior to billet covers they are actually mandated by World Superbike rules.
Covers are designed to fit over the stock pieces using stock bolts and so do not require removing the stock cover to mount them. These sacrificial covers are quick and easy to fit, yet provide protection to expensive crankcases. TaylorMade covers are ideal for track day riders.
TMR B1LC, Carbon/Kevlar left side engine cover 1125R Buell
TMR B1RC, Carbon/Kevlar right side engine cover 1125R Buell
|
$140.00
$160.00
|
|
|
|
|
|
Mini-Indicators
Featuring neutral grey lenses with orange bulbs, these bright mini indicators work well, but look a whole lot sexier than the stock items. Sold in pairs.
Rear Brake/Light Bar
This super neat rear running and brake light bar features super-bright LEDs to replace the bulky originals. Tidy and effective.
TMA 006, Turn signals
TMA 004, LED light bar
|
$19.95
$36.00
|
|
|
|
|
|
|
Power Commander III
The Performance Choice. Fit a Power Commander III delivered with a pre installed custom map optimised to extract the maximum performance from your Taylormade-equipped bike. (Just plug in and go).Check out the dyno results in Performance Charts, which show the clear horsepower advantage the Power Commander III gives using our settings.
| TMR 007, Power Commander |
$329.00
|
|
|
|
|
|
T-Shirts
Your bike looks good, but what about you? Dress up in a TaylorMade T-shirt. Available in Men's sizes M-XL and Woman's size M. 100% cotton.
| TMR 017, T-shirt |
$14.95
|
|
|
|
|
|
